|
|
Dynamic analysis of an in-line arranged cylindrical chimney
Harazim, Petr ; Kanický, Viktor (referee) ; Salajka, Vlastislav (advisor)
The diploma thesis deals with the response of a steel smokestack structure to wind loads. A detailed computational model implementing the finite element method was created in accordance with the available drawing documentation. The new smokestack was placed next to an existing one, thus it can be assumed that these two structures will affect each other. The thesis also elaborates on the problems of aerodynamic and aeroelastic stability of the earlier smokestack; in particular, the occurrence of vortex shedding in resonance with eigenfrequency of the structure, with the use of the program ANSYS CFX. The evaluation of the structure includes survey of the strength and deflections of the structure. The calculations are in accordance with valid ČSN EN norms.
|
|
|
Reinforced concrete structure of the cooling tower
Vostal, Lukáš ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
The content of the bachelor thesis is structural analysis of cooling tower fundamental construction. Modeling of the computational model and the calculation of internal forces of cooling tower fundamental construction in Scia Engineer. The reinforced concrete parts of the structure are assessed at the ultimate limit state and the subsoil is assessed at serviceability limit state. Part of the thesis is also the desing of the reinforcement of the foundation structure and processing of the drawings.
|
|
| |
|
|
Analysis of adhesion of waterproofing systems of self-adhesive asphalt felts
Kerekanič, Robin ; Žák,, Antonín (referee) ; Žižková, Nikol (advisor)
This diploma thesis focuses on the adhesive of asphalt felts on flat roofs. The practical part evaluates on the basis of experiments the adhesion of self-adhesive asphalt felts on conventional system with warm deck. It proposes and experimentally verifies the method for temperature cycling of samples and the system for causing condensation under bitumen sheet. The influence of temperature and humidity on the adhesion of the bitumen sheet during the realization, the subsequent effects of these influences as well as the condensation test are monitored by static loading. The influence of the dynamic load on the adhesion of the waterproofing to expanded foamed polystyrene is also tested. In the discussion and conclusion, the influence of the human factor on the resulting adhesion and the suitability of the methods used are also assessed.
|
|
|
Steel structure of lookout tower
Pavlas-Jirásek, Václav ; Horáček, Martin (referee) ; Balázs, Ivan (advisor)
The diploma thesis deals with the design of a main load-bearing steel structure of the lookout tower with the height 35,5 m. Two different types of solution were designed. The first design is a spacial truss structure and the second design is a fixed solid cantilever. The first solution was chosen to be further developed. The truss structure has square plan that varies with height. The width is 6,6 m in the level of supports and 3,6 m in the narrowest section. Main bearing members are five pin-supported columns. The base material is steel of class S355.
|
|
|
Prestressed bridge on the expressway
Juřenčáková, Jana ; Zlatuška, Karel (referee) ; Koláček, Jan (advisor)
The purpose of the diploma thesis is to design a expressway bridge over the river Vsetínská Bečva. The bridge is located between Valašské Meziříčí and Vsetín. Separate superstructures are designed for each directions of the expressway. The right superstructure, which is wider, is considered for detailed design. Two variants were proposed, A double T beam superstructure and a box girder superstructure. The three span box girder superstructure was chosen for the design. Spans are 48+65+48 m long. Two options of construction process of the superstructure were proposed. This bridge is designed according to the limit states, the influence of construction process is considered. Structural models of construction were made as a finite element model and a plate model. Structural analysis, drawings and visualization were developed.
|
|
|
Lookout tower Vršek nad Zlínem
Hanáčík, Jan ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
This thesis deals with the design and assessment of the load-bearing structure of the lookout tower. The tower is 37.45 m high with the layout in the shape of a regular octagon. The object is located within the city of Zlín. The project is provisionally drawn in two variants. Hand-static calculation, drawings and engineering report is processed only for one variant. The variants differ in the structure of staircase. The thesis is drawn up pursuant to the standards of ČSN EN.
|
|
|
Exhibition pavilion
Řeháček, Jakub ; Šmak, Milan (referee) ; Sýkora, Karel (advisor)
The thesis deals with the design and review of the supporting structure of the exhibition pavilion in the suburb of Brno. The design is shaped dome built over the octagonal floor plan with eight lateral niches. The pavilion is 30m wide and 8 meters tall.
|
|
|
Reinforced concrete construction of cooling tower
Zralý, Tomáš ; Buřič, Pavel (referee) ; Šulák, Pavel (advisor)
There was solved reinforced concrete cooling tower in the diploma thesis. This is a rotationally symmetrical construction. The cooling tower is concrete shell on columns. The cooling tower was solved using the finite element method, computer program Midas FEA. The work includes: calculation using the program Midas FEA, comparison of load between eurocode and foreign literature, the design of shell and columns, drawings form
|
|
|
Lookout tower
Jedzoková, Patricie ; Pešek, Ondřej (referee) ; Balázs, Ivan (advisor)
The object of the diploma thesis is design and assessment of a steel lookout tower situated in Beskydy mountains. Two different variants were designed. The first variant is of square shaped plan and the second one is of hexagonal shaped plan. Both variants are spatial truss structures. They are shaped as hourglass. The variants were compared and the first one was chosen to be further developed. The lookout tower is 36 meters high and it is divided by floors. One floor is 3,6 meters high. The widest section is 8 meters, the narrowest section is 5 meters wide. The structure is pin-supported into concrete foundation. The concrete is class C25/30. The roof covering is made of trapezoidal sheet of class S280GD. Each steel element is made of steel of class S355.
|
guest ::
